Wheel loader Stump Grinder WSG37

What’s a Stump Grinder?

Stump grinders are powerful tools used for eradicating tree stumps. By gradually chipping away at a stump with a multi-toothed cutting wheel that spins at high speeds, stump grinders are able to rapidly tear and strip away small pieces of wood, progressing deeper with each pass.

It is the perfect solution for removing stumps and stubs in all sizes and wood types and is handy whenever small hand grinders can’t manage!

This powerful excavator stump grinder utilizes a disc system for compact excavators.

WORKING WITH THE STUMP GRINDER

• Never operate the unit without first reading and understanding the operator’s manual.
• Operate the unit only in daylight or sufficient artificial light.
• Do not carry load with arms in the raised position. Always carry loads as close as possible to the ground.
• Check your work area and know where all utility lines are. Avoid hitting underground electrical wires, cables, pipes, fence posts, gas lines, uneven side walk edges, large rocks, etc.
• Never operate equipment while under the influence of alcohol, prescrip- tion drugs, nonprescrip tion drugs, or illegal drugs which could inhibit physical and/or mental capacity.
• Do not exceed rated operating capacity, as machine may become un- stable which may result in loss of control.
• Do not operate the unit without covers installed.
• Keep hands, feet, hair and clothing away from equipment with engine running. Stay clear of all moving parts.
• Do not raise the attachment when the grinding wheel is rotating.
• ALWAYS LOWER THE LOADER ARMS TO THE GROUND, SHUT OFF THE ENGINE AND REMOVE THE KEY BEFORE GETTING OFF THE UNIT.

TRANSPORTING THE STUMP GRINDER

• Follow all federal, state and local regulations when transporting the unit on public roads.
• Use extra care when loading or unloading the machine onto a truck or trailer. Disconnect hydraulic couplers during transportation.

MAINTENANCE

• Never work on equipment while it is running. Always lower the loader arms to the ground, shut off the engine , remove the key and disconnec t hydraulic couplers before performing maintenance on the unit.
• Never make hydraulic repairs while the system is under pressure. Injury or death could result.
• Observe proper maintenance schedules and repairs to keep the unit in safe working order.
• Always wear safety goggles or glasses when working on equipment.
• Use only manufacturer recommended replacement parts. Other parts may be substandard in fit and quality.

It is a compact excavator stump grinder for removing individual stumps in forests, parks, roadside and on river banks. Its smaller size makes it very easy to maneuver and suitable for small and midsize excavators.

During urban construction, trees are an important part of environmental greening, but over time, some old trees or branches often become safety hazards. How to effectively deal with these trees and reduce environmental pollution and waste of resources has become an important issue.

The working principle of the incredible tree stump grinder is to use high-speed rotating blades to grind the trees into pieces and discharge them through the outlet. This process is very fast and does not require any additional treatment to completely remove the tree. The trees we are familiar with are mainly composed of three layers, the epidermis, xylem and pith. The blades inside the stump grinder can completely crush these three layers in an instant. At the same time, the utilization rate of the machine has also been improved, and waste can be reused to reduce waste.